Looking for:
Smith and wesson sd40 manual
.
For example, Colt developed the ill-fated All American as the had fallen out of favor with many. Fast forward to the 21st Century. But, the company still wanted a simple pistol that could be affordably built for the low price end of the market. I was intrigued by the idea. The SD40 is roughly the same size as a G19, but make no mistake: it will not fit in Glock 19 holsters. The SD40 is chambered in.
Both the SD40 and SD9 are available in standard capacity and low capacity. The Smith and Wesson SD40 holds 14 cartridges in the magazine 10 in the low capacity mags , while the SD9 holds 16 rounds. Both the SD40 and SD9 ship with two stainless steel magazines.
The magazines have visual inspection holes on both sides allowing the user to quickly assess how many rounds are loaded. Prior to receiving the gun, it was my understanding that the SD magazines were interchangeable with the Sigma magazines. I strongly suspected this was true. I obtained a pair of. I found the fit and finish of the SD40 were excellent. For the price of the SD40, I expected some minor tool marks and other imperfections, yet I could find none. Even the inside parts on the SD40 looked very good.
The stainless steel slide was coated with a black Melonite finish. The SD40 was easy to grip and manipulate. The pistol had a moderate amount of checkering in the front strap and back strap to improve how well you can hold onto it during recoil. Texturing was also used on the sides of the grip frame.
The grip sides swelled slightly, providing some fill for the hand. The high part of the grip is slightly recessed to improve trigger reach. I was very impressed by the grip and feel of the gun. However, the fit may not be perfect for you. There were serrations on the slide fore and aft of the ejection port. The serrations are not fish gills or another finely laid pattern. Rather the slide serrations are widely spaced and seem taller than on other pistols. With both bar hands and in gloves, the slide was easy to work.
The forward serrations were adequate for press checks if you chose to use them for that purpose. Sights on the Smith and Wesson SD40 used a simple, yet effective design. The front sight was a tritium night sight with a white outline. The rear sight was a notched black with two white dots. In daylight conditions, I found the design worked well.
For low light conditions, I found the design worked equally well. Some may argue that tritium in the front sight only was a cost-cutting measure. That argument may be correct. However, I prefer a glowing front sight only as opposed to glowing sights front and rear. Under extreme stress in real low light conditions, the eye is much more likely to be confused by multiple glowing dots. On the other hand, a single glowing dot is easy to pick up and use. Both the front and rear sights are dovetailed, allowing for easy replacement of one or both should you want to.
A small ridge protects the magazine release from accidentally being pressed. The magazine release was not ambidextrous or reversible.
Likewise, the slide stop was designed for righties only. I am right-handed, so this did not bother me during the Smith and Wesson SD40 review. The SD40 had witness hole at the rear of the chamber that served as a loaded chamber indicator. Field stripping the SD40 is easy and identical to the Sigma and Glock pistols.
With an empty chamber please double check , press the trigger to decock the striker. Retract the slide slightly while pulling down on both sides of the takedown catch, and then push the slide forward and off of the frame. Thankfully, the SD40 uses a captive recoil spring, so no worries about a spring or guide rod flying across the room. During this review, I tested 8 different loads with the pistol.
Conservatively, I have put an additional 2, rounds through it and it continues to chug along without a single malfunction. The gun was easy to shoot and did not rub or wear on the hand in any unusual places.
Recoil was very manageable and all but the most inexperienced shooters should be able to run this gun without any problems. Accuracy was excellent at all ranges up to 25 yards. Game Room. Strength Training. Cardio Equipment. Fitness Accessories. Sports Medicine. Sports Nutrition. Throwback Classics. Fan Shop. Sports Gear. Ariat BCG Brooks. Carhartt H2OX Crocs. Double tap to zoom. See Details. SKU: ITEM: Features and Benefits Semiautomatic double action with round capacity Polymer frame with a stainless-steel slide and barrel Plastic grip Self-defense trigger White-dot dovetail front and rear sights Picatinny rail Comes with two round magazines.
Specifications Manufacturer warranty - parts: Lifetime limited Trigger pull lb. Please note that all firearm purchases require valid US government issued ID and related firearm paperwork. You must be a resident of the state selected for pickup.
.
Inexpensive handguns sometimes get a bad reputation. They could be unreliable, break easily or have a bad trigger. I wondered how this would shoot as the price is exceptionally aggressive. Subsequently, the company re-introduced the SD40 so that both versions are now options. Rolling back the clock to the 80s, a scrappy upstart called Glock drastically changed the self-defense handgun market.
The SD40 series of pistols can be purchased online through our affiliate links below. During that time, there were attempts by competitors to offer an alternative to the Glock pistol.
For example, Colt developed the ill-fated All American as the had fallen out of favor with many. Fast forward to the 21st Century. But, the company still wanted a simple pistol that could be affordably built for the low price end of the market. I was intrigued by the idea. The SD40 is roughly the same size as a G19, but make no mistake: it will not fit in Glock 19 holsters.
The SD40 is chambered in. Both the SD40 and SD9 are available in standard capacity and low capacity. The Smith and Wesson SD40 holds 14 cartridges in the magazine 10 in the low capacity mags , while the SD9 holds 16 rounds. Both the SD40 and SD9 ship with two stainless steel magazines. The magazines have visual inspection holes on both sides allowing the user to quickly assess how many rounds are loaded. Prior to receiving the gun, it was my understanding that the SD magazines were interchangeable with the Sigma magazines.
I strongly suspected this was true. I obtained a pair of. I found the fit and finish of the SD40 were excellent. For the price of the SD40, I expected some minor tool marks and other imperfections, yet I could find none.
Even the inside parts on the SD40 looked very good. The stainless steel slide was coated with a black Melonite finish. The SD40 was easy to grip and manipulate. The pistol had a moderate amount of checkering in the front strap and back strap to improve how well you can hold onto it during recoil.
Texturing was also used on the sides of the grip frame. The grip sides swelled slightly, providing some fill for the hand. The high part of the grip is slightly recessed to improve trigger reach. I was very impressed by the grip and feel of the gun. However, the fit may not be perfect for you. There were serrations on the slide fore and aft of the ejection port. The serrations are not fish gills or another finely laid pattern.
Rather the slide serrations are widely spaced and seem taller than on other pistols. With both bar hands and in gloves, the slide was easy to work. The forward serrations were adequate for press checks if you chose to use them for that purpose. Sights on the Smith and Wesson SD40 used a simple, yet effective design. The front sight was a tritium night sight with a white outline. The rear sight was a notched black with two white dots.
In daylight conditions, I found the design worked well. For low light conditions, I found the design worked equally well.
Some may argue that tritium in the front sight only was a cost-cutting measure. That argument may be correct. However, I prefer a glowing front sight only as opposed to glowing sights front and rear. Under extreme stress in real low light conditions, the eye is much more likely to be confused by multiple glowing dots.
On the other hand, a single glowing dot is easy to pick up and use. Both the front and rear sights are dovetailed, allowing for easy replacement of one or both should you want to. A small ridge protects the magazine release from accidentally being pressed. The magazine release was not ambidextrous or reversible. Likewise, the slide stop was designed for righties only.
I am right-handed, so this did not bother me during the Smith and Wesson SD40 review. The SD40 had witness hole at the rear of the chamber that served as a loaded chamber indicator. Field stripping the SD40 is easy and identical to the Sigma and Glock pistols.
With an empty chamber please double check , press the trigger to decock the striker. Retract the slide slightly while pulling down on both sides of the takedown catch, and then push the slide forward and off of the frame.
Thankfully, the SD40 uses a captive recoil spring, so no worries about a spring or guide rod flying across the room. During this review, I tested 8 different loads with the pistol. Conservatively, I have put an additional 2, rounds through it and it continues to chug along without a single malfunction.
The gun was easy to shoot and did not rub or wear on the hand in any unusual places. Recoil was very manageable and all but the most inexperienced shooters should be able to run this gun without any problems. Accuracy was excellent at all ranges up to 25 yards. Paper plates at 25 yards were no problem, with very tight groups at closer ranges.
The trigger on the SD40 was not great. It was also markedly better than the double-action trigger on the CZ P Duty. The trigger was consistent from shot to shot, which is to be expected. I observed a certain amount of improvement with the shooting and dry firing I did. However, many factory triggers are better than the SD I apologize.
Mine proved to be utterly a reliable handgun. The pistol is chambered in a serious caliber and is a good size for both concealed carry and home defense. The gun is large enough to shoot comfortably for long range sessions and should serve very well in both training and self-defense. You can get a better trigger by spending more money, which you may want to do. Keep in mind that for your money you are also getting the backing of a major company in the firearms industry.
Special note: The SD line of pistols is only one example of capable self-defense pistols that are affordably priced. No monies or other considerations were offered or solicited for the writing of this article. Instead, I liked the gun enough that I purchased it. The purchase price was reduced from the MSRP as the gun was now a used item.
I do not charge readers a dime to access the information I provide. Some of the links on this page and site are affiliate links to companies like Amazon and Palmetto State Armory. These links take you to the products mentioned in the article.
Should you decide to purchase something from one of those companies, I make a small commission. The links do not change your purchase price. I do not get to see what any individual purchases.
Please leave any comments about this Smith and Wesson SD40 review or your own experiences with the pistol in the comments below. Please keep things civil and void of profanity. GHG is a family-friendly site, and I aim to keep it that way. Has anybody noticed a problem with their brass after shooting? I like to save my brass for reloading , but I have noticed that every round that I have put through my SD40VE developed a slight bubble down by the primer be end of the brass case, making the brass useless for reloading.
Just wondering if anybody else has noticed or experienced this problem. Hence my brother and I believe it to be a dent and not a bulge. Simple shove on the back of the slide put it into battery, not a major malfunction but worth mentioning, I suppose. I have several handguns, including some high end customs.
I bought an SD 40 used dirt cheap , and took it to the range. I will probably never sell it. I have always been a revolver guy. I now own the SD40, I have a concealed carry permit. I want to start carrying this, but I am not all that familiar with the striker plate. I have read that it is ok to hard a round chambered, then I read it is dangerous to keep one in the pipe? Can someone please advise me on this?
No comments:
Post a Comment